MOUNTING OPTIONS FOR NEON STICKS

OPTION 1 - SWIVEL MOUNT
Swivel Mount is included with your sign purchase. This will enable you to mount your sign to a wall or existing arch gives you the ability to turn it in the direction which makes it most effective.
OPTION 2 - CIRCULAR MOUNT
Circular Mount is included with your sign purchase. This option is ideal for car washes with existing round arches. Once loosely installed, you will be able to turn the sign in the desired direction.
OPTION 3 - ALUMINUM PEDESTAL
This type of mount gives you the flexibility to mount the sign anywhere in the carwash in the direction that makes it most visible.
Part No. 95P. . . . . . .$50.00
Not included with your stick purchase

MOUNTING OPTIONS FOR CABINETS

OPTION 1 - SWIVEL MOUNT
This will enable you to wall mount the sign then turn it in the direction which makes it most visible. You can also use this option to mount the sign on existing arch or machinery. CHECK FOR CLEARANCE!.
please specify driver’s or passenger’s side for installation

OPTION 2 - SWIVEL MOUNT
Flat wall mount is self explanatory. The two enforcement aluminum strips along the back are designed to run your anchors through them for extra rigidity.

 

CABINET SCHEMATICS
 
3'x5' menu -
horizontal
3'x5' menu -
vertical
3'x6' menu -
horizontal
3'x6' menu -
vertical

MOUNTING OF THE INSTRUCTIONAL MIRROR
1. Anchor the 3 aluminum angles to the wall
2. Spacing between angles should be just like the angle spacing on the back of the mirror
( Mirror clearance to the ground should have a few more inches than Car Wash clearance.
example: Car Wash clearance - 7'4", mirror clearance - 7'8")
3. Adjust chains lengths to have the best view.
MOUNTING OF POLYPROPYLENE WALL COVERING
Used in car washes and farming industries. White corrigated polypropylene wall sheets are strong, light weight and easy to clean. Installs easily with high-density polyethylene moldings.
4'x8' - 8mm (.315"),
Part No.8WS . . . . . .$19.95

4'x9' - 8mm (.315"),
Part No.9WS . . . . . .$21.95

4'x10' - 8mm (.315"),
Part No.10WS . . . . . . $23.95
  
     
Wall channel - 8',9,'10'
Part No.WC. . . . . . .$4.95		    
     
Top snap cap - 8',9',10',
Part No.TSC . . . . . .$4.95		    
     
Edge snap cap - 8',9',10',
Part No.ESC . . . . . . $4.95		    
     
Masonry Fastening 3/16”x1-1/4”
Protect against rust and corrosion. Simple, two-step operation: drill, then drive. Eliminates the need to set anchors.
Part No.MFS (package of 100) $8.03
 		   
     
1/4" Magnetic Bit Holder
Magnetic driver for 1/4-in. hex screw head. 3-in. overall length, it drives your masonry screw through the wall channel.
Part No.MBH (each). . . . $8.03
    
     
Masonery/Plastic Drill Bits
Drill bit that will go through your corrigated plastic and masonery wall in the same time. (good for approx. 50-75 holes)
Part No.MPD (each). . . . $3.95
size:5/32";length:3 1/2"

Part No.MPD2 (each). . . . . . $3.95
size:5/32";length:3 1/2"

Part No.MPD3 (each). . . . . . $3.95
size:5/32";length:3 1/2"
   
     
Uni-Tap Rivets
White plastic rivets, it is an easy way to secure wall panels, just drill hole and using non-marking rubber malet, hammer in place. Has 5/8-in. head diameter.
Part No.UTR 1 5/8" rivet
(package of 100) . . . . . . . . . . $Call

Part No.UTRN 1 1/2" rivet
(package of 100) . . . . . . . . . . $Call		  
     
Rubber Hammer
16 oz. rubber malet. It won’t leave marks on the white board.
Part No.RBB (each). . . . $8.00